• 0 Posts
  • 19 Comments
Joined 1 year ago
cake
Cake day: June 14th, 2023

help-circle


  • IIRC, the first model ate mosfets for breakfast because the photo resistor is way too slow going from illuminated to dark. That leaves the mosfet in a fairly high resistance state for an extended amount of time during which it dissipates a lot of power. You should add some kind of Schmitt trigger inverter that buffers the resistive divider and gives you a clean narrow edge to drive the mosfet gate. A 74HC14 together with a 7805 voltage regulator should give you enough output voltage to drive the mosfet. These chips cost less than a single replacement mosfet and you can drive 6 coils with them.



  • The first part of the article triggers me. Heat in the physical sense is thermal energy. Like with other forms of energy, you need an energy difference to actually have it perform work, or you need to invest work to create an energy difference (in a heat engine or a heat pump, respectively). Just like you would letting a weight fall to the ground and lifting it back up. And cooling is removing heat, so ice cubes are actually cooling your drink.

    In a pan, low specific heat capacity is not that desirable. That’s why people use big honking chunks of cast iron to prepare food: so adding the cold food doesn’t lower the temperature too much. But the metal also gets you good heat conductivity to quickly get the heat from the stovetop to where it’s needed.

    Conversely the handle is made from materials that have low conductivity so heat gets conducted more slowly towards your skin. The higher capacity helps but isn’t that crucial: air has fairly low heat capacity but you can stick your hand into an oven at 100C without getting burned. Unlike boiling water, which has quite a high heat capacity.

    The refrigerant should have a high heat capacity to move as much heat as possible for a given temperature difference. Most systems employ a liquid-gas phase change somewhere in the cycle to transfer even more heat energy in the form of latent heat. R134a, a common refrigerant, has a heat capacity about 3/4 of that of water.

    One more thing: even if the electrical energy is completely nonrenewable, heat pumps still offer an environmental advantage. Gas power plants are fairly efficient, around 40% of the extractable heat energy gets converted to electricity. With a COP of 2.5, a heat pump would produce as much output as burning the gas in a perfectly efficient furnace. If the COP is larger, the heat pump is more efficient than burning the gas directly, and modern heat pumps usually exceed 2.5 except in the coldest days of winter. Add to that the existence of dual-cycle power plants with 60% efficiency, and the losses of a conventional furnace, and heat pumps may win even on days where the COP is slightly less than 2.



  • This was followed by Orandazuma wa Denki Unagi no Yume o Miru ka? (Do Dutch Wives Dream of Electric Eels?, Dec. 1984, PC-8801). Inspired by Philip K. Dick’s Do Androids Dream of Electric Sheep? (1968), players take on the role of a private investigator who has to track down a sex doll (called Dutch wives in Japan) that has become sentient and is murdering its lovers. The player tracks down the rogue doll by seducing all the women in Tokyo’s red-light district.

    The concept sounds awesome. The porno parody “Blade Runner” needed.








  • It’s probably not a good idea for actual use, but if you’d like to experiment: looks like the 3-pin devices U4 and U5 on the upper right provide feedback through the optocouplers next to the class Y cap north of the transformer. I bet those are LM431 voltage references (or similar). The passives around them provide filtering, but two of the resistors should form a resistor divider for the Ref pin (lower right pin if the single pin is on top). That divider sets the voltage.




  • Isn’t that the same for Reddit or Lemmy? The content creators and mods don’t see a penny either. Operationally, a social network probably requires a lot more compute power and somewhat more bandwidth compared to a site that serves mostly static content. But I don’t see why small donations shouldn’t cover that. The cost per user seems moderate, otherwise few people could afford to run an instance with 1000s of users without charging them.