cross-posted from: https://lemmy.world/post/21641378

So I just added a TP-Link switch (TL-SG3428X) and access point (EAP670) to my network, using OPNSense for routing, and was previously using a TP-Link SX-3008F switch as an aggregate (which I no longer need). I’m still within the return window for the new switch and access point, and have to admit the sale prices were my main reason with going for these items. I understand there have been recent articles mentioning TP-Link and security risks, so I’m thinking if I should consider returning these, and upping my budget to go for ubiquity? The AP would only be like $30 more for an equivalent, so that’s negligible, but a switch that meets my needs is about 1.6x more, however still only has 2 SFP+ ports, while I need 3 at absolute minimum.

I’m generally happy with the performance, however there is a really annoying bug where if I reboot a device, the switch drops down to 1G speed instead of 10G, and I have to tinker with the settings or reboot the switch to get 10G working again. This is true for the OPNSense uplink, my NAS and workstation. Same thing happened with the 3008F, and support threads on the forums have not been helpful.

In any case, any opinions of switching to ubiquity would be worth it?

  • rehydrate5503@lemmy.worldOPEnglish
    1·
    22 days ago

    I actually tried this as my second step in trouble shooting, the first being using different ports.

    In the non-omada management software, it defaults to 10G, and if the devices is on before the switch it negotiates 10G correctly and works at full speed (tested with iperf3). As soon as any of the 10G connected devices is rebooted, I’m back to 1G. To fix it, I then have to set the port to 1G with flow control on, apply changes, save config, refresh page, change to 10G with flow control off, apply, save config and it goes back to 10G again. Alternatively I can reboot their switch and it’s fine again.

    In Omada its the same, fewer steps to get there but I have to sometimes do it 2-3 times before it works.

    Same issue with both 10G TP-Link switches, so I’m thinking it might be the SFP. Using Intel SFP+ with FS optical cables. I’m using a DAC for the uplink from the 10G switch to my unmanaged 2.5G switch, and that doesn’t have the problem of dropping, always works max speed.