• TheOneCurly@lemmy.theonecurly.page
    link
    fedilink
    English
    arrow-up
    28
    arrow-down
    1
    ·
    1 year ago

    Hot water radiators are designed to work with temperature deltas in the 110 degree F range (target 70 room temp, 180 water temp). In the summer your temperature deltas are much tighter, you can only get to at best 32 F before the water freezes and with a target of 70 that’s only 38 degrees of temperature delta trying to cool the room. They simply won’t work efficiently enough for it to be worth it, not to mention being on the floor is very poor positioning for summer.

      • PM_Your_Nudes_Please@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Delta is commonly used to refer to a difference between two points. So in this case, a delta of 110 degrees means whatever your target temperature is, the radiator should be 110 degrees away from that temperature. Trying to reach 70° means a temp of 180 at the radiator when heating, or -40° when cooling. OP was pointing out that -40° obviously isn’t a feasible temperature for a water-based radiator, so they simply aren’t great for cooling.

      • TheOneCurly@lemmy.theonecurly.page
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Energy transfer is proportional to the difference in temperature between the 2 things (delta T), their contact surface area (in this case the length of the radiator and the size of the fins), and time. If you want a room to change temperature quickly and with radiators that don’t take up an entire wall then you need the water temperature to be very different from the room temperature.