• huginn@feddit.it
    link
    fedilink
    arrow-up
    5
    arrow-down
    2
    ·
    5 months ago

    AFAIK most American AC units can be retrofitted to be heat pumps pretty easily. You’re just making it flow in reverse, after all.

    • mkwt@lemmy.world
      link
      fedilink
      arrow-up
      4
      ·
      edit-2
      5 months ago

      In automotive at least, it’s pretty common to size the evaporator and condenser coils based on their expected operating temperatures and (therefore) pressures. Usually this means condenser is a lot bigger than evaporator.

      If you reverse the flow with the right valves and compressor setup, then the heat exchangers will still be sized wrong for efficiency. I suppose you could design a bidirectional system from the start that trades off for middling efficiency in both modes.

      I’m not at all convinced that there are a substantial number of such bidirectional-sized residential systems installed in North America. But it’s also possible that the residential folks don’t care much about HX efficiency.

      • huginn@feddit.it
        link
        fedilink
        arrow-up
        1
        arrow-down
        1
        ·
        5 months ago

        That makes sense, but also most heat pumps I know of are also AC units - like those mini splits installed in new apartments these days.

        Would that not also be a balanced system?

        And even if we’re talking about lower efficiency it’s still more efficient than burning gas in a furnace right?